This cmdlet tests connectivity from the Run command infrastructure to the JetStream MSA VM.

Important: The following are required:

1) The MSA VM IP address must be accessible from the Run command agent.
2) Port 443 must be open.

If both conditions are not met, the agent will be unable establish a session with the MSA VM and Run command tasks will fail.

Test-JetDRApplianceConnection Run command.


Command Parameters: Test-JetDRApplianceConnection

MSAIp

IP address of the MSA VM.



Note: For JetStream versions lower than 4.3, port 8443 must also be open between the Run command agent and the MSA VM. If the required ports are blocked, the following condition may be observed:



This requirement has been removed from JetStream version 4.3 and later.