JetStream Software Portal

DRVA Deployment Stuck at 95%

This article applies to all JSDR software versions.

Problem

During the deployment of a DRVA, the task appears to halt at 95% and does not proceed further; however, the DRVA virtual machine has in fact been successfully created and is operational.

Solution

This problem can be exhibited when a communication failure occurs between the MSA and DRVA.

  1. Confirm connectivity between the MSA and DRVA by running the following command from the MSA CLI: curl -kv https://:32878/drva/about

  2. If the command above returns a connection error, verify the network configuration and ensure the MSA and DRVA can communicate over port 32878.

  3. If using VLANs, ensure that they can communicate with each other.
    • This applies for both static & DHCP IP.

It is recommended to configure VLAN tagging at one level of the network infrastructure only.
If both the VM and the VPG are configured with VLAN tags, it can lead to duplication of VLAN tagging, causing potential network conflicts.

Was this article helpful?

Related Articles

Can We Help You?

Can't find what you're looking for?
Contact JetStream